10
1.1
1.2
1.3
1.4
2.1
2.2
2.3
2.4
English
GENE
AL INFORMATION (FIG. 1)
Use of the manual
This manual forms an integral part of the appliance and should be
kept for future reference. Please read it carefully before installing/
using the unit. If the appliance is sold, the Seller must pass on this
manual to the new owner along with the appliance.
Delivery
The appliance is delivered partially assembled •n a cardboard box.
The supply package is illustrated in fig_l.
Documentation supplied with the appliance
Al Use and maintenance manua
A2 Safety instructions
A3 Declaration of conformity
Disposing of packaging
The packaging materials are not environmental pollutants but must
still be recycled or disposed of in compliance with the relevant
legis ation in the country of use.
Safety signs
Comp y with the instructions provided by the safety signs fitted to
the appliance.
Check that they are present and legible; otherwise, fit replacements
in the original positions.
El sign - Indicates that the appliance must not be disposed of as
municipal waste; it may be handed in to the dealer on purchase of a
new appliance, The appliance's electrical and electronic parts must
not be reused for improper uses s'nce they conta•n substances
which constitute health hazards.
L Symbols
Q symbol - Indicates that the appliance is intended for
professional use, i.e. for experienced people informed
about the relative technical, regulatory and legislative
aspects and capab e of performing the operations neces-
sary for the use and maintenance of the appliance.
E3 symbol - Indicates that the appliance is intended for
non-professional (domestic) use.
TECHNICAL INFORMATION (FIG.I)
Envisaged use
This appliance has been designed for individual use for the cleaning
of vehicles, machines, boats, masonry, etc, to remove stubborn dirt
using clean water and biodegradable chemical detergents.
Vehic e engines may be washed only if the dirty water is disposed of
as per regulations in force.
- Intake water temperature: see data plate on the appliance.
- Intake water pressure: below 10 bar.
- Operating ambient temperature over O'C in accordance with
standard EN 60335-2-79/A1 only for domestic model (see sym-
bol
Operator
The symbol on the front cover identifies the applianc€s intended
operator (professional or non-professional),
Improper use
Use by unskilled persons or those who have not read and under-
stood the instructions in the manual is forbidden.
The introduction of Inflammable, explosive and toxic liquids into the
appliance is prohibited.
Use of the appliance in a potentially inflammable or explosive
atmosphere is forbidden.
The use of non•original spare parts and any other spare parts not
specflcally intended for the model in question is prohibited
All modifications to the appliance are prohibited. Any modifications
made to the appliance shall render the Declaration of Conformity
null and void and relieve the manufacturer of all liability under civ'l
and criminal law.
Main components
Bl
B2
83
B4
86
Adjustab e spray nozzle
Lance
Gun with safety catch
Power supply cable with plug
5 High pressure hose
Detergent tank (on models with this feature)
2.5
3.1
3.2
3.3
3.4
241 Accessories (where applicable - see fig. 7).
Cl Nozzle cleaning tool
Q Rotating nozzle kit
a Handle
C4 Brush
C5 Hose reel
Safety devices
A Caution - Danger!
Do not tamper with or adjust the safety valve set-
ting.
• Safety valve and pressure limiting valve.
The safety valve is also a pressure limiting valve. When the gun
trigger is released, the valve opens and the water recirculates
through the pump inlet,
- Safety catch prevents accidental spraying ofwater.
INSTALLATION (FIG.2)
Assembly
A Caution - Danger!
All installation and assembly operations must be
performed with the appliance disconnected from the mains
power supply.
The assembly sequence is illustrated in fig.2.
Assembling the rotating nozzle
(For models with this feature)
The rotating nozzle kit delivers greater washing power.
Electrical connection
A Caution - Danger!
Checkthat the electrical supply voltage andfrequen-
cy (V-Hz) correspond to those specified on the appliance
data plate (fig.2). The appliance should only be connected
to a mains power supply equipped with an adequate earth
connection and a differential security breaker (30 mA)
to cut off the electricity supply in the instance of a short
circuit.
3.3.1 use of extension cables
Use cables featuring "IPX5" protection level.
The cross-section of the extension cable should be pro-
portionate to its length; the longer it is, the greater its
cross-section should be, See table .
Water supply connection
A Caution - Danger!
Only cleanorfiltered intake.
The delivery of the water intake tap should be equal to that
of pump capacity.
Place the appliance as close to the water supply system as possib e.
347
90747_HW1311.indb 10
Connection points
Water outlet (OUTLET)
Water inlet with filter (INLET}
Connection to the moms water supply
The appliance can be connected directly to the mains
dinking water supply only ifthe supply hose is fitted with
a backflow preventer valve as per current regulations in
force. Make sure that the hose is at least Ø 13 mm and
that it is reinforced,
2-07-2008