Translation of the original instructions
liNDEk
General information
Symbols
Safety precautions
Usage
Care and maintenance
Troubleshooting
Warranty conditions
Disposal
Pictures
pag.
7
7
71
9
11
11
11
11
92-95
GENERAL INFORMATION
INTENDED USE
The appliance can be used for washing
surfaces outdoors, whenever pressurised
water is required to remove dirt.
With special optional accessories, it can
be used for foaming and sandingblasting,
and for washing with a rotary brush for
application to the gun.
performance
and
• This
appliance's
userfriendliness make it suitable for NON
PROFESSIONAL use.
TECHNICAL DATA
(see technical data plate)
SYMBOLS
Optional
CAUTION! It is important to be
careful of the following items.
IMPORTANT
LOCKED
OPEN
IF PRESENT
Double insulated (IF PRESENT).
supplementary insulation is applied
to the basic insulation to protect
against electric shock in the event of
failure of the basic insulation.
SAFETY PRECAUTIONS
WARNINGS
AOIWARNING: This appliance is for outdoor
use only.
A02WARNlNG: Always disconnect the
electricity and water supplies on completion
of every job.
A03WARNlNG: Do not use the machine
if a supply cord or important parts of the
machine are damaged, e.g. safety devices,
high pressure hoses, trigger gun.
A04WARNlNG: This appliance has been
designed for use with the detergent
provided or the detergent specified by the
manufacturer, such as a neutral shampoo
based on biodegradable anionic surface
activedetergents.Theuseofotherdetergents
or chemicals may put the appliance's safety
at risk.
A05a WARNING: Do not use the machine
within range of persons unless they wear
protective clothing.
05b - Do not allow other people or animals
within a range of 5m when operating the
machine.
05c - Always wear suitable protective clothing
in order to protect yourself against ricocheting
parts.
05d - Do not touch the plug and the appliance
with wet hands or when barefoot.
05e - Wear safety goggles and non-slip rubber
footwear.
A06WARNlNG: Do not direct the nozzle
toward mechanical parts containing
lubricant grease, as the grease will dissolve
and spread over the surrounding ground.
Vehicle tyres/tyre valves may only be
cleaned from a minimum distance of 30 cm,
otherwise the vehicle tyre/tyre valve could
be damaged by the high-pressure jet. The
first indication of this is a discoloration of the
tyre. Damaged vehicle tyres/tyre valves can
be deadly dangerous.
07WARNlNG: High pressure
jets can be dangerous if subject
to misuse. The jet must not be
directed at persons, animal, live electrical
equipment or the machine itself.
7