lem repeats again or if the product does not
start again, take the product to the nearest
After Sales Service Point
STABILITY
A WARNING: The machine must be always kept
on horizontal bases, in a safe and stable way.
USAGE
DESCRIPTION OF THE MACHINE
See the specific instructions manual provided.
ASSEMBLY INSTRUCTIONS
See the specific instructions manual provided.
PUT INTO SERVICE
See fig.ß
STARTING UP
See fig.ß
HIGH PRESSURE LANCE
See fig.m
see fig.ß
HIGH PRESSURE HOSE
See fig.m
WATER SUPPLY
Water supply collection
Water supply from the water main
Connect a supply hose (not included) to the
water inlet of the unit and to the water supply.
Open the water supply.
WARNING: (symbol) machine not suitable
for connection to the potable water mains.
The cleaner can only be connected to the wa-
ter mains if the water mains is separated by a
backflow preventer. Make sure that the hose
is at least Ø 13mm-1/2 inch and that it is rein-
forced.
A WARNING: water that has flown through
backflow preventers is considered to be
nonpotable.
I&IMPORTANT: Only clean or filtered water
should be used for intake. The delivery of the
water intake tap should be equal to the double
of the maximum pump range.
- Minimum delivery rate: 15 1/ min.
- Maximum intake water temperature: 400C
- Max inlet water pressure: 1 Mpa
Place the cleaner as close to the water supply
system as possible.
Water supply from an open container
Unscrew the coupling part for the water inlet.
Screw the suction hose with filter (not included)
onto the water connection of the unit.
Hang the filter in the container.
Vent the unit before operation.
Unscrew the high-pressure line at the high-
pressure outlet of the unit.
• Switch on the unit and let it run until water
free of bubbles emerges at the high-pressure
outlet.
Switch off the unit and screw on the high-
pressure hose again.
Failure to comply with the above conditions
causes serious mechanical damage to the
pump and the loss of warranty cover.
ELECTRICITY SUPPLY
- The appliance's electrical connection must
comply with the IEC 60364-1 standard.
IMPORTANT: Before
the
connecting
appliance, make sure that the nameplate data
are the same as those of the electrical mains
and that the socket is protected by a differential
security breaker with tripping sensitivity below
0.03 A - 30 ms.
- If the appliance's plug is not compatible with
the socket, have the socket replaced with
another of suitable type by professionally
qualified staff.
- Never use the appliance in ambient
temperatures below 00 C if it is equipped with a
PVC (H vv-F) cable.
AX Y WARNING: Inadequate extension cords
can be dangerous.
WARNING: If an extension cord is used,
the plug and socket must be of watertight
construction.
Information for supply may also be obtained
15