PAGE: 2/19
KUBOTA MODEL INFORMATION DOCUMENT Issue Date: 03.03.2003
No.: M2-74/150-04 Revision No.: 04
Corporation
Type: M2
Revision Date: 07.03.2005
0.6. Location and method of affixing 4 rivets front Iett side of tractor frame
statutory plates and inscriptions
(photographs or drawings)
0.7. Location of the EC-type-approval mark
on systems, components and separate
technical units, and method of affixing
it
ROPS: Back surface of Two rivets
the rear left-hand frame
CABIN: Inside surface of the stick
rear under panel
Coupling: on the surface of the stick
drawbar
0.8. Name(s) and address(es) of assembly KUBOTA Tsukuba Plant, Sakano-shinden,
plant(s) Yawara-mura, Tsukuba-gun, Ibaraki-ken,
Japan
1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE TRACTOR
photographs see annex 1.
dimensional drawings see annex 2.7.
Number of axles and wheels 2 axles, 4 wheels
Number and position of axles with not applicable
twinned wheels (if applicable)
1.1.2. Number and position of steered axles 1 axle in front
1.1.3. Powered axles 1 rear parmanent drive and 1 front, with a
(Number, position, interconnection) disengageable interconnecting coupling
1.1.4. Brakes axles (number, position) 1 axle, rear
1.2. Position and arrangement of the front, in longitudinal direction
engine
1.3. Position of the steering wheel: center
1.4. Reversible drivin 0% Q g r_ı
e3 150*2001/3*Ore82*04
SociCtC Nationale de Certifıcation et d'Ipkohogıadlıfıe
1.5. Chassis L-5201 SANDWEILER (Luxern%ourg)
Organisme acer6dite OLAS EN 45011
AceMditation N' 5/001 (Pon& communiquee sur demande)