Symbols on the machine
The appliance must not be directly connect-
ed to the public drinking water network
The high pressure jet must not be directed at
persons, animals, live electrical equipment
or at the appliance itself.
Protect the appliance against frost.
Description of the Appliance
These operating instructions describe the maximum
equipment. Depending on the model, there are differ-
ences in the scopes of delivery (see packaging).
See fold-out page 4 for illustrations
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
Coupling element for water connection
Water connection with integrated sieve
High pressure hose
Hose guide
Storage for spray lances
Storage / parking position for trigger gun
Connection for Plug 'n' Clean detergent
Carrying handle
Transport handle, detachable
Hose switch
High pressure connection
Appliance switch "O/OFF"/ „I/ON"
Mains cable with mains plug
Accessory compartment
Hooks for fastening the net
Net for accessory compartment
Bearing wheel
Base with carrying handle
Full Control trigger gun
Battery compartment
LED pressure indicator
MIX/ 1 - SOFT / 2 - MEDIUM 13 - HARD
Battery compartment lock
Lock trigger gun
Button for detaching the high-pressure hose from
the trigger gun
Full Control spray lance dirt grinder
For strong contaminations
Pressure level: HARD
Full Control spray lance Vario Power
Carrying out the most common cleaning tasks
Pressure levels: HARD / MEDIUM 1 SOFT / MIX
Optional accessories
Plug 'n' Clean detergent bottle with locking lid
not included in the scope of delivery
Water supply hose
Special accessories
Assembly
See fold-out page 3 for illustrations
Mount loose parts delivered with appliance pri-
or to start-up
You will need the 2 included screws as well as a Philips
screwdriver PH 2.
Installing the base
Illustration
Insert base.
Insert the included dowels all the way into the
holes.
Secure the base with the enclosed screws.
Install storage for spray lances
Illustration
Hook in storage for spray lances.
Secure the storage for the spray lances by means
Of two screws.
Install the transport handle
Illustration
Attach the transport handle.
Secure the transport handle by means of two
Attach the net to the accessory compartment
Illustration
Hook the net into the hooks shown in the illustra-
tion.
Connect the high pressure hose to the
trigger gun
Illustration
Push the high pressure hose into the trigger gun
until it locks audibly
Note: Make sure the connection nipple is aligned
correctly.
Check the secure connection by pulling on the high
pressure hose.
Special accessories expand the possibilities of using
your appliance. Please contact your KÅRCHER dealer
for further information.
12