der running water.
20
Storing the Appliance
Maintenance
Prior to extended storage periods, as dur-
The appliance is maintenance free.
ing the winter, also observe the instructions
Troubleshooting
in the Care section.
Park the machine on an even surface.
You can rectify minor faults yourself with
Press the disconnect on the trigger gun
the help of the following overview.
and remove the high pressure hose
If in doubt, please consult the authorized
from the trigger gun.
customer service.
Push the casing of the quick coupling
Danger
for the high pressure hose toward the
Risk of electric shock. Turn off the appliance
rear and disconnect the high pressure
and remove the mains plug prior to perform-
hose from the appliance.
ing any care and maintenance work.
Illustration O
Repair work and work on the electrical
Stow away the mains cable, the high-
components may only be performed by an
pressure hose and accessory on the
authorised customer service.
appliance.
Appliance is not running
Frost protection
Pull on the lever of the trigger gun; the
Caution
device will switch on.
Appliances and accessories that are not
Check whether the voltage indicated on
completely drained can be destroyed by
the type plate corresponds to the volt-
frost. Completely drain appliance and ac-
age of the mains supply.
cessories and protect them against frost.
Check the mains connection cable for
To avoid damage:
damages.
Completely drain all water from the ap-
Appliance does not start, motor
pliance: Switch the appliance on with
hums
detached high pressure hose and de-
tached water supply (max. 1 minute)
Voltage reduction due to weak mains sup-
and wait, until no more water exits at the
ply or when using an extension cable.
high pressure connection. Turn off the
When switching on, first pull the lever of
appliance.
the trigger gun and then switch the ap-
Store the appliance and the entire ac-
pliance switch to "I/ON".
cessories in a frost free room.
Pressure does not build up in the
Maintenance and care
Danger
Risk of electric shock. Turn off the appliance
and remove the mains plug prior to perform-
ing any care and maintenance work.
Care
Prior to longer periods of storage, e.g. in
the winter:
Remove filter from suction hose for de-
tergent and clean under running water.
Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
EN -11
appliance
Check setting at the spray lance.
Check water supply for adequate deliv-
ery rate.
Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.
Appliance ventilation: Switch the appli-
ance on with the high-pressure hose
detached and operate (max. 2 minutes)
until the water exits the high-pressure
connection without bubbles. Switch off
appliance and reconnect high-pressure
hose.