Operation
Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
Description of the Appliance
These operating instructions describe the
basic models of the high pressure cleaners
shown on the front cover.
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out
pages!
Coupling element for
water connection
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
18
Water connection with integrated sieve
Appliance switch "0/OFF"/ „I/ON"
High pressure hose
Dosage regulator for detergent
Storage for trigger gun
High-pressure hose drum
Transport handle
Hand crank for hose drum
Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
Storage for accessories
Option
Storage hook for mains connection ca-
ble
Option
Automatic coiling for mains cable
Mains cable with mains plug
Plug 'n' Clean detergent bottle with
locking lid
Wheels
Trigger gun
Lock trigger gun
Key to detach the high pressure hose
from the trigger gun
Washing brush
21 Spray lance with Dirtblaster
22 Spray lance with pressure regulation
(Vario Power)
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install the storage for hand-spray gun
Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Illustration B
Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Option
Illustration
Install the top storage hook.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration @
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
Illustration
Wind up the high-pressure hose on the
hose drum.
Illustration
Slide the free end of the coiled high
pressure hose through the recesses on
the dosage regulator.
Illustration
Attach the transport handle, insert the
bolts into the bores and screw them in.
Illustration
Press the connecting fitting from the
short high pressure hose into the brass
intake until it locks into place audibly.