Operation
Scope of delivery
I
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
Description of the Appliance
These operating instructions describe
the basic models of the high pressure
cleaners shown on the front cover.
These operating instructions describe
the maximum equipment. Depending
on the model, there are differences in
the scopes of delivery (see packaging).
Illustrations on fold-out
pages!
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Coupling element for water connection
High pressure connection
Water connection with integrated sieve
Appliance switch "O/OFF"/ „I/ON"
Dosage regulator for detergent
Storage for trigger gun
Transport handle
Detergent reservoir with locking lid
Storage of detergent reservoir with de-
tergent connection
Storage for accessories
Storage hook for mains connection ca-
ble
Mains cable with mains plug
Wheels
Trigger gun
Lock trigger gun
Key to detach the high-pressure hose
from the trigger gun
Washing brush
Spray lance with Dirtblaster
Spray lance with pressure regulation
(Vario Power)
High pressure hose
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install the storage for hand-spray gun
Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
Icoks in.
Illustration B
Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Option
Illustration
Install the bottom storage hook.
Illustration
Install the top storage hook.
Install the dosage regulator for deter-
gent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
Option
Illustration
Attach the transport handle, insert the
bolts into the bores and screw them in.
19