The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
Description of the Appliance
Illustrations on Page 2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Coupling element for water connection
High pressure hose
Quick coupling for high pressure hose
Water connection with integrated sieve
Appliance switch "O/OFF"/ „I/ON"
Dosage regulator for detergent
Storage for trigger gun
Storage of detergent reservoir with de-
tergent connection
Transport handle
Storage for high-pressure hose
Storage hook for mains connection ca-
ble
Storage for accessories
Detergent reservoir with locking lid
Wheels
Trigger gun
Lock trigger gun
Key to detach the high-pressure hose
from the trigger gun
Spray lance with pressure regulation
(Vario Power)
Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Operation
Scope of delivery
EN-4
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install wheels
Illustration
Push the wheels into the intake and se-
cure with the enclosed plugs, watch for
positioning of plug.
Install the storage for hand-spray gun
Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Insert the top holder and push down all
the way.
Install the transport handle
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration
Slide the transport handle into the guide
and secure it with 2 screws.
Install the dosage regulator for detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
Connect the high pressure hose to the
hand spray gun
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
15