kind of ovens which has a weight of over 180 adjustment mode. The time set value can be
grams per loaf. In this case, when 10 trays of changed at any moment during the operation.
those which take 25 loaves of bread each, are put Until the new value is recorded in the memory,
into the oven, its capacity will be 250 loaves of the last recorded value is used by the program.
bread in one baking. The baking time is 18-20 • You can select the required cycle by pressing
minutes. cycle selection key (700/1400). For sensitive
➢ However, the 20mm deep, non-perforated GN2/1
trays which are used for baking different flaky cooking, please press “1” numbered low cycle.
pastry, may vary according to the kind of such • You can choose the requested heating steps with
pastry. It is possible to bake an average of 35-40 heater selection key. For example; you can set
servings of flaky pastry on one baking tray. In this the heating elements for 18 kW. on 6 kW or 12
case, oven's capacity will be sufficient for 350- kW. or 18 kW. in FKE022 convection oven.
400 servings. The baking time varies between 20 (Only for FKE022 and FKE042)
and 35 minutes, depending on the characteristics • Please provide the operation of the oven in
of the dough and the other ingredients used. accordance with the adjusted time and heat by
➢ 40/65mm deep GN2/1 trays which are used for pressing start/stop button. Time value reaches to
oven-coocked dishes, take e.g. 40 chicken thighs adjusted value by starting from 1 and increasing
with sauce, and the cooking time is between 75 one by one.
and 80 minutes. In this case, when the oven is • When the oven reaches to adjusted time, the time
working with full capacity, a meal for 400 persons is over led and a voice alarm will be on. Please
may be cooked at one time.
➢ 65 mm deep GN2/1 trays which may be used press alarm stoper button and stop the alarm.
specially for cooking pulses, dishes which are Take off the cooked dish.
cooked in their own juice, contain 60 servings • When you want to cool down the inside of the
each. When seven trays are cooked at the same oven, press temperature set value adjustment
time in the oven, you will have 420 servings button and adjust the required cooling value by
prepared at one time. pressing increasing and decreasing buttons.
For other models and detailed information please After, press cooling button. The fan on (cool) led
see table “T3”. will be on until reached to the required heat.
• The average capacity of ovens : Cooling button can work when the door of the
➢ for FKE006 : 60 portions/hour oven is opened or closed.
➢ for FKE010 : 100 portions/hour
➢ for FKE022 : 200 portions/hour SWITCHING OFF
➢ for FKE042 : 400 portions/hour • Press Start/Stop button.
• Turn the cycle selection key to “0” position.
OPERATION • Turn off the water entrance valve and main switch
• Turn on the water valf and electric switch. feeding the appliance.
• Press temperature set value adjustment button
(related led will be on). Adjust the temperature set SAFETY WARNINGS
value by pressing increasing and decreasing • If any error occurs in the fan motor of the device,
buttons in accordance with the material going to there is a thermic contact (thermistor) cutting the
be cooked. Press temperature set value whole circuit automatically.
adjustment button again and the set value will be • If any error occurs in the electronic card or other
recorded in the memory, led will be off and exit electronic part of the device, there is a limit
from the heat set value adjustment mode. The heat thermostat cutting the circuit automatically.
set value can be changed at any moment during • If the door of the oven is opened during cooking,
the operation. Until the new value is recorded in there is a switch system stopping the device.
the memory, the last recorded value is used by the • The door arm of the oven has double level
program. opening in order to avoid the injury of the user
• Until the oven reaches to the adjusted from heat caused due to the sudden opening.
temperature, fan + heater led will be on. The led
will be off when reached to the adjusted heat. CLEANING and MAINTENANCE
Please put your dish when the led is off. • Do not clean the appliance with direct or high
• Press time set value adjustment button (related pressure water not to damage the electrical
led will be on). Adjust the time set value by installation.
pressing increasing and decreasing buttons in • Before beginning to clean or maintenance, the
accordance with the material going to be cooked. electricity of the oven must be switched off.
Press time set value adjustment button again
and the set value will be recorded in the memory,
led will be off and exit from the heat set value
9