INTRODUCTION - Unit: g & oz
Thank you for purchasing Fakir Vitrum - LCD display 40x20mm / 0.8’
Electronic Kitchen Scale which has been - Auto - switch off
designed and manufactured to give you - Low - battery indication / Overload indication
many years of trouble-free service. You
may already be familiar with using a similar KEY FUNCTIONS
product, but do please take time to read - On/Tare key: Press this key to change to
these instructions – they have been written the weight mode from the clock mode;
to ensure you get the very best from your press this key to do the tare function on the
purchase. weigh mode.
- Time Key: You can adjust time with this
SAFETY IS IMPORTANT key.
To ensure your safety and the safety of - Unit Key: You can choose g & oz.
others, please ensure you read the
instruction manual before you operate this BEFORE USING
product. Keep this information in a safe 1. Turn over the scale and open the battery
place for future reference. door. Insert the battery to the battery case.
2. Put the scale on a flat table and ensure it
ATTENTION steady.
1. Follow the basic safety precautions for all
office equipment when using this scale. TIME SETTING
2. The manufacturer does not represent this 1. Press the “On / Tare” key to enter the weight
unit to be waterproof. Do not expose this mode.
product to rain or moisture. 2. When the scale is in the weight mode, press
3. Do not disassemble this scale.The scale and hold “Time” key to enter the time setting.
does not contain any parts that can be
repaired by the user. 3. Separately press the key of “On/Tare” and
4. Read all instructions before operating the “Unit” to adjust the hour and minute. And
scale. press “Time” return to the weighing mode,
5. Use the scale only for its intended purpose. at the same the time setting is finished.
6. Please take care that this scale is not 4. Press and hold the key of “On/Tare”, the
designed for commercial or medical use. scale will come back to the clock function.
FEATURES WEIGHING MODE
- Equipped with a high precision ‘strain- 1. In the clock mode press the key of
gauge’ sensor and high capability CPU to “On/Tare”, the scale will enter the weighing
ensure the weighing accuracy. mode. The display will show “Hello”, and
- Capacity: 5 kg. then show “0g”.
- Weighing and Clock function 2. By pressing the key of “Unit”, you can
- Tare function choose the weight unit: “g” or “oz”.