HOW TO USE BUTTON “Z/T” to the bowl/container. Net weight of the
1. Turn on the scale by pressing button object will be shown on LCD.
“ON/OFF” as described above. 5. Step 3 and 4 can be repeated multiple
2. Place the bowl/any other container on times for weighing additional object to
the platform. The weight value of the bowl/container.
bowl/container will appear. 6. After multiple weighing and re-setting
using the “Z/T” button, if you start
removing items from the bowl/container,
you will see negative value (-) appear on
the LCD reading which represents the
weight value for the quantity of the object
being removed from the bowl. You can
again use “Z/T” button to re-set the
reading to zero.
7. When you first turn on the scale, if the
reading does not show or stabilize at
zero. You can also press “Z/T” to re-set
the reading to zero.
AUTO-OFF/MANUAL OFF
1. When the scale first turned on and no
3. Press the button “Z/T” (=ZERO/TARE) weighing activity taking place within 1
will automatically clear the weight value minute, it will be automatically turned off.
re-setting reading to zero, “0” and “if the 2. I after some weighing activities taken
total weight of the materials is less than place, the scale then left sitting idle it will
200g “ZERO” if the weight is more that be automatically turned off in 30 seconds.
200g “TARE” will appear on LCD. At 3. You can also manually turn off the scale
“ZERO” the weight will not be deducted whenever needed by pressing button
from total capacity of the scale. But at “ON/OFF”
“TARE” the weight will be deducted from
the capacity of the scale.
4. Now you can add items you wish to weigh
9