GB OPERATION
Filter change indicator Filter change indicator
When the dust bag or filters are full or if the accessories are
H blocked (hose, pipe, nozzle), the filter change indicator will
24 shine [24]. To ensure correct analysis, the maximum suction
level [H] needs to be set and the floor nozzle lifted from the
floor.
In this case, change the dust bag or blocked filter or remedy
the blockage.
NOTICE!
Work breaks When using the turbo mattress brush or the crevice
nozzle,it is possible that the filter change indicator may
shine before the dust bag or filter is full. This is due to
technical reasons and does not mean that the appliance
25 is faulty.
Suction pipe park position with automatic suction cut-off
Use the park holder to hold the suction tube safely in
position when the cleaner is not being used. To do this,
insert the park holder [25] of the floor nozzle into the nozzle
After vacuum cleaning holder on the reverse of the appliance; the motor is
automatically switched off.
G
WARNING!
Follow the steps below as soon as you stop vacuum
cleaning. Never leave the appliance unattended.
• Press the foot button "On/Off" [G] to switch off the vacuum
cleaner.
D • Remove the plug from the mains socket.
• Press the foot button "cable rewind” [D] to reel in the cable.
Gently guide the cable with your hand until the cable has
been completely wound in and the plug rests snugly
against the opening.
38