NOZZLES GB
E Floor suction nozzle[E]
You can adjust the floor suction nozzle with a working width
14 of approx. 28 cm by using the change-over switch [14] for
the vacuuming of carpets (bristle collar retracted), or hard
floors (bristle collar extended).
The two thread receptacles [15] remove threads, hairs, fluff
etc. from the carpet. If required, they can be replaced without
15 problem since they are only inserted into the base plate to
the left and right of the suction opening in each case.
NOTICE!
Set suction capacity medium to high.
Hard-floor nozzle[16]
Used especially for hard-floors such as tiles, parquet or
laminate. Soft brush hairs allow the nozzle to glide easily
over the floor and it picks up even the finest dirt free of
residue.
NOTICE!
Set suction capacity low to medium.
Textile nozzle[17] Optional accessory
Used especially for upholstered furniture, curtains or garments.
Perfect dust removal through extra-large lint and thread
receptacle, which removes statically-clinging lint and hair.
NOTICE!
Set suction capacity medium to high.
35