The variable temperature control dial allows DO NOT IMMERSE ANY PART OF THE GRILL
you to select a temperature suited to the TOASTER IN WATER OR ANY OTHER
foods which are being cooked. LIQUID.
4.CARE AND CLEANING
• Before cleaning, turn the power off at the
power outlet and then remove the plug.
Allow your Grill toaster to cool before
cleaning. The unit is easier to clean when
slightly warm.
• Always clean your Grill toaster after each
use to prevent a build up of bake-on foods.
• Wipe cooking plates with a soft cloth to
remove food residue. For baked on food
residue squeeze some warm water mixed
with detergent over the food residue then
clean with a non abrasive plastic scouring
pad or place wet kitchen paper over the grill
to moisten the food residue.
Not: The cooking plates are coated with a
non-stick surface, do not use abrasives. Do
not use spray on non-stick coatings as this
will affect the performance of non-stick
surface on the cooking plate.
• Cleaning the Dip Tray: Remove and empty
the Dip Tray after each use and wash the
tray in warm, soapy water. Avoid the use of
scouring pads or harsh detergents as they
may damage the surface. Rinse and dry
thoroughly with a clean, soft cloth and
replace.
• Non-Stick Coating: We recommend that
care is taken with the non-stick coating
particularly when using metal utesil. Do not
use sharp objects orcut food inside the Grill
Toaster. We will not be liable for damage
utesils have been misused. Cooking on a
non-stick surface minimizes the need for
oil, food does not stick and cleaning is easier.
Any discolouration that may occur will only
detract from the appearance of the Grill
Toaster and will not affect the cooking
performance. When cleaning the non-stick
coating, do not use metal (or other abrasives)
scourers. Wash with warm soapy water.
Remove stubborn residue with a non
abrasive plastic scouring pad or nylon
washing brush.
5. STORAGE
• Switch off the appliance and unplug from
the power outlet.
• Allow the Grill to fully cool.
• Click the removable drip tray into place.
• Wrap the cord in the cord storage area below
the unit.
• Store on a flat, dry level surface.
8