INTRODUCTION Safety
Thank you for purchasing this • Do not allow the mains lead to touch hot
product object.
You may already be familiar with using a • Close supervision is necessary when the
similar product, but do please take time toaster is used by or near children.
to read these instructions – they have • Always ensure that the toaster has
been written to ensure you get the very completely cooled down before storing.
best from your purchase. • Ensure that the breads fits easily into the
slots before using the toaster. Torn or
Safety is Important thick slices can cause the toaster to jam.
To ensure your safety and the safety of • NEVER attempt to remove bread that has
others, please ensure you read the jammed in the slots without first
Product Safety and Electrical Safety unplugging the toaster from the mains
information before you operate this supply. Allow the cool completely before
product. removal.
Please pay particular attention to the • Be careful not to damage the internal
section of this manual that carry this mechanism or heating elements when
warning symbol. removing the bread. Do not touch the
Keep this information in a safe place for internal parts of the toaster with any
future reference. implement.
TOASTER ELECTRICAL SAFETY
PRODUCT SAFETY
IMPORTANT WARNING!
The mains lead of this product is not Read these safety instructions thoroughly
replaceable by the user. If the mains lead before connecting this product to the mains
is damaged, it must only be replaced by supply.
an authorized dealer. Before switch on, make sure that the
voltage of your electricity supply is the
Positioning your Toaster, same as that indicated on the rating plate.
WARNING This product is designed to operate at
Bread can burn. Do not place or operate 230VAC50Hz. Connecting it to any other
this toaster near or below curtains and power source may cause damage.
other combustible materials. Do not leave This product may be fitted with a non-
the toaster unattended when in use. rewireable plug. If it is necessary to
• The toaster should not be used under a change the fuse in the plug, the fuse cover
cupboard or close to a wall as scorching must be refitted. If the fuse cover becomes
may result. lost or damage, the plug must not be used
• Wait for your toaster to cool before moving it.until a suitable replacement is obtained.
• Never lift the toaster by placing your If the plug has to be changed because it
fingers inside or near the bread slots. is not suitable for your socket, or due to
7