• Protective motor filter (Fig. 20/1) is used • For a rough clean, hold the filter screen
to filter out the fine dust particles. over a dustbin. Then knock it gently.
Clean: every 2 months NOTE:
• Hygienic exhaust filter (Fig. 20/2) Filters If the filter screen is extremely dirty,
out the fine particles from the blown- rinse it thoroughly with a shower head
out air. (Fig. 22)
Replace: every 6 months
Then leave it to dry completely. Only
re-insert it once it is completely dry.
• The filters can become blocked after
some time and can thereby reduce the • Place the separation unit back on the
suction power. It is therefore important dust container so that the markings are
that the abovementioned intervals are positioned above each other, as shown
adhered to. (Fig. 23/1). Connect both parts by
• If you determine that a filter is damaged turning clockwise until the markings
then replace it immediately. are flush (Fig. 23/2).
Cleaning the Filters
• Switch the appliance off
• Remove and empty the dust container,
• Turn the separation unit anticlockwise
off the dust container (Fig. 21).
Take this opportunity to clean the
protective motor filter.Otherwise, insert
20