the dust container back into its ATTENTION:
mounting bracket until it audibly clicks The protective motor filter is not suitable
into place. for the dishwasher.
Cleaning the protective motor filter
1. Switch the appliance off NOTE:
2. Remove the dust container If the protective motor filter is very dirty,
3. Release the filter cover (Fig. 24/1) and rinse it thoroughly with a shower head
remove it. (Fig. 27). Do not use any brushes for
this.
Then leave the filter to dry (approx. 15
4. Remove the protective motor filter hours at room temperature). Only use
together with the holder at the lip it again when it is completely dry. If the
provided for this purpose below right dirt cannot be removed, insert a new
(Fig. 25). protective motor filter
6. Insert the dry protective motor filter
back into its holder.
7. Place protective motor filter into its
receptacle.
8. Replace the filter cover by hooking it
precisely from above first (Fig. 28/a).
Then engage the lock by pressing it
5. Hold the protective motor filter together (Fig. 28/b) until it audibly clicks into
with the holder over a dustbin. Only place.
then should you separate both parts
from each other. For a rough clean,
gently knock both parts over a dustbin
(Fig. 26).
21