Operating the Unit NOTE:
WARNING: You can quickly reduce the suction
Check the cylinder vacuum cleaner power with the secondary air controller,
and the power cable before each use. e. g. to release curtains that have been
A damaged appliance must never be sucked in.
used.
NOTE:
ATTENTION: The cylinder vacuum cleaner has an
Only use the cylinder vacuum cleaner overheating protection device. It will
if all filters are correctly in place and switch off automatically if overheated
once you have ensured that no (e. g. due to blocked nozzles or overfull
openings are blocked The filters must dust container). If this happens, then
be intact and dry. Non-compliance can turn off the appliance and remove the
damage the cylinder vacuum cleaner. plug. Remove the cause of overheating.
Wait approx. 45 min. You can use the
1. Push on the desired nozzle cylinder vacuum cleaner again once it
2. Remove the cable, by holding the plug, has cooled down.
until the yellow mark is reached.
Switching off the unit and retracting
Warning: If the red mark is visible, use the power cable
the cable retract button to draw in the 1. Switch off the cylinder vacuum cleaner
cable again up to the yellow mark. using the on/off switch and pull the
Otherwise the cable can break off. plug out of the socket.
There is a risk of electric shock. 2. Take the plug in your hand and hold it
firmly.
3. Switch on the cylinder vacuum cleaner
using the on/off switch. Warning: The power cable can whip
4. Adjust the carpet/hard floor switch around when being pulled in, it can
depending on the type of flooring: also trip you or somebody else up or
• Hard floor Laminate flooring, tiles, PVC knock down objects.
flooring, etc.
• Carpet Long and short pile carpets, 3. Press the cable retract button to pull
runners, etc. in the power cable. Guide the last part
with the plug by hand. For storage or
5. To vacuum, pull the cylinder vacuum during work breaks, you can use the
cleaner behind you like a sledge. parking hook mount to hook the parking
Observe the recommendations of the hook onto the floor nozzle.
flooring manufacturer.
WARNING:
If you leave your work area, switch off
the appliance.
15