USING YOUR STRAIGHTENER taut, carefully slide the plates along the
PREPARING FOR USE selected section of hair, in one smooth
movement all the way down to the ends.
7. Keep the strands of hair smooth whilst you
work to avoid ridges.
SAFETY CAUTIONS
• The Professional straighteners reach very
high temperatures. Do not leave on your
1. Solid ceramic plates hair for more than a few seconds as this
2. Swivel cord may damage your hair.
Please read and retain these instructions • Always avoid plates coming into contact
before operating for future reference. with hands or skin.
1. Remove all packaging and keep safe until • Never cover the unit with anything, such as
satisfied with your product. a towel.
2. DO NOT plug in until ready to use. • Never drop the straightener on to a hard
3. Ensure all packaging and tangle free before surface, as this may cause permanent
use. damage to the solid ceramic plates
• Never place on a surface that isn’t heat
USAGE resistant and always position out of reach
IMPORTANT: TH‹S PRODUCT REACHES of children.
HIGH TEMPERATURES • Do not immerse any part of the unit, cord
1. Plug into a suitable mains supply when the set or plug in water or any other liquid.
straightener is ready for use. Always place • Unplug and allow to cool fully, away from
straightener on a solid, flat, heat resistant children on a heat resistant surface before
surface. Do not place straightener on any cleaning and storage.
soft or uneven surfaces such as carpets,
bedding or rugs and never cover. The plates HINTS AND TIPS
reach a high temperature quickly • Hair should be completely dry to achieve
2. Once plugged in to the mains supply, do best results.
not touch the ceramic plates. • Keep the strands of hair smooth whilst you
3. Separate a section of hair approximately work, to avoid ridges half way down
5cm in width and smooth it out with a brush. • As with all straighteners that reach salon
4. Place the chosen section of hair between high temperatures, do not use frequently
the plates of the straightener and close the to avoid damaging your hair.
plates. Take care not to touch the very hot
plates. CLEANING AND MAINTENANCE
5. Hold the straightener in place until the hair 1. Unplug the straightener from the supply
is fully heated this will be almost instant. socket and allow to cool fully before
When holding the straightener always attempting to clean. This appliance reaches
ensure fingertips are placed away from the very high temperatures when switched on
hot plates. and will take time to cool down fully. Whilst
Do not hold the straightener in the area cooling, place on a heat resistant surface,
above the ceramic plates, only hold on the away from children and in a safe place.
patterned gripping sections Never cover.
6. Once the hair is heated, holding the hair 2. The casing may then be cleaned by wiping