• H.E.P.A. filter (Fig. 3/5) Filters out the
fine particles from the blownout air.
Replace: every 6 months
Fig. 4/2
Cleaning the protective motor filter
Fig. 3/5 1. Switch the appliance off
2. Remove the dust container
• The filters can become blocked after 3. Release the filter cover (Fig. 4/3) and
some time and can thereby reduce the remove it.
suction power. It is therefore important 4. Remove the protective motor filter
that the abovementioned intervals are together with the holder at the lip
adhered to. provided for this purpose below right.
• If you determine that a filter is damaged
then replace it immediately.
Cleaning the Filters
• Switch the appliance off
• Remove and empty the dust container,
• Turn the separation unit anticlockwise 24
off the dust container (Fig. 4/1).
Fig. 4/3
5. Hold the protective motor filter together
with the holder over a dustbin. Only
then should you separate both parts
from each other. For a rough clean,
Fig. 4/1 Gently knock both parts over a dustbin.
• For a rough clean, hold the filter screen ATTENTION:
over a dustbin. Then knock it gently. The protective motor filter is not suitable
If the filter screen is extremely dirty, for the dishwasher.
rinse it thoroughly with a shower head
Fig. 4/2 Then leave it to dry completely. NOTE:
Only re-insert it once it is completely If the protective motor filter is very dirty,
dry. rinse it thoroughly with a shower head
Do not use any brushes for this. Then
leave the filter to dry (approx. 24 hours
17