dust container, switch off the appliance. 7. Place the dust container onto the
This is how you will prevent dust from cylinder vacuum cleaner. Press the
destroying the appliance. dust container firmly into its mounting
Empty the dust container at the latest bracket until it audibly clicks into place.
when the container is full or the suction
power has dropped. NOTE:
It may be necessary to push a bit
1. Release the dust container by pressing harder. To make it easier, you can hold
down the release button as shown . the release button pressed when
2. Lift the dust container forwards out of inserting the dust container.
the cylinder vacuum cleaner. 8. Check whether the dust container is
3. When emptying the dust container, securely seated.
hold it low over a dustbin.
4. Press the open button. The base opens Filters
and the dust runs into the dustbin. The cylinder vacuum cleaner has the
following filters:
• Filter screen of separation unit
Thoroughly pre-cleans the air in the
dust container.
Clean: every 2 months
• H.E.P.A. and protective motor filter is
used to filter out the fine dust particles.
Clean: every 2 months
• Hygienic exhaust filter Filters out the
fine particles from the blown-out air.
Replace: every 6 months
5. Carefully knock the remaining dust
loose.
6. Close the base.