NOTE:
It may be necessary to push a bit
harder. Make sure when doing this that
the cover clicks fully into place behind
both projections provided for this
purpose (Fig. 32). Otherwise the cover
and possibly even the exhaust filter will
fail out easily.
7.Correcting malfunctions
Before sending the appliance to
authorized Fakir services , use the
following table to check whether you
can correct the malfunctions yourself.
WARNING:
Before starting to troubleshoot, switch
the appliance off and pull out the mains
plug. Never use a defective
appliance.
MALFUNCTION POSSIBLE CAUSE SOLUTION
Plug is not plugged in or the Plug in the plug or switch the
Appliance does not work
appliance is not switched on. appliance on
Socket does not carry any Test the cylinder vacuum
current. cleaner at another socket which
you are sure carries curreent
Power cable is damaged. Have the cable replaced by
authorized Fakir services
Appliance does not suck up Dust container is full or blocked. Empty/clean dust container.
any dirt
Selected brush/nozzle are Adjust your brush/nozzle
incorrect for the type of flooring.selection to the type of flooring.
Filter is dirty. Clean the corresponding filter.
Nozzle, telescopic tube or Remove the blockage. If
suction hose are blocked. necessary, use along wooden
rod for this (e.g.a broom handle)
Appliance is making unusually Sucked-in particles are Remove the particles. If
loud noises while running blocking the air-way. necessary, use a long wooden
rod for this (e. g. a broom
handle).
ı.