Operation ATTENTION: Be careful during
Before you start up your vacuum cleaner: pulling the cord out, the yellow mark
• Check if the bag is assennbled inside the on the cord show the end of the cord.
dust cup (1), air-inlet filter (2) and air -outlet
filter (3),
il dili İL uca`. • Start the vacuum cleaner up pressing the
On-Off button (7)
• Select appropriate suction power moving
the cursor (8) according to the symbols on
the vacuum cleaner.
• Insert one end of the flexible hose (4) into
the air intake duct, fit another end of the SUCTION POWER REGULATION
hose (handle) with sucking tube, The vacuum cleaner is equipped with
electronic power regulation, which enables
continuous power regulation. The regulation
is executed with linear potentiometer.
Moving the cursor according to the symbols
on the vacuum cleaner results in increasing
• Adjust the desired length of the suction or reducing power. The vacuum cleaners
tube (depending on the height of the person 450 type are also equipped with mechanical
operating the appliance) by pressing the suction power regulation on the hose
"A" button and slide the tubes in the direction handle. It is enough to open the valve, as
indicated by the arrows, it is shown in the drawing, to reduce the
suction power.
• Fit the chosen accessories, i.e. brush-
nozzle, in another end of the tube,
• pressing the cord re-wind button (5) pull
the cord out (6) of the casing and insert the
plug into power socket,
SAFETY VALVE OPERATION
The vacuum cleaner is equipped with safety
valve, which is located inside the dust cup
(bag). It opens automatically when the hose
or fitted accessories are blocked or the
dust bag is excessively full of dust. You