Inserting Q in the soft tip
Hold the soft tip firmly with the pull
cord pointing upwards.
Use your Other hand to hold the
module: the battery should point
downwards, the small battery contact
being on the side of the pull cord. The
flat side Of the module should also
point to the pull cord.
• Insert the module by turning it over
into fhe soft tip.
12
Check the position Of the module inside
the soft tip. If the position is not like the
one illustrated in the image: hold the
soft tip firmly and turn and/or push the
module into its correct position.
Hold the module firmly and pull at
the pull cord only to make sure that
the module is placed sufficiently deep
inside the soft tip.
If necessary, repeat the last two steps.
Removing Q from the soft tip
Keep the module firm and use your other
hand to pull the pull cord downwards.
•w:rÆ!
13