6.3 Steam leaks uncontrollably from the bottom and along the sides Of the
pressure cooker lid. Water drops.
Cause: Silicon hd gasket isn't property placed on its seat and on the corners 01 the lid.
Solution: Remove the gasket and check if it is securely and properly fitted into the
groove inside the pressure cooker lid.
6.4 Stains are hard to remove
There are various causes for stains. Food. which is burnt and stuck inside the cooker,
should be cleaned with dish detergent and then, by heating in water with a scourer
that is not made of metal. The cause of excessive brown, blue, yellowish or greenish
discoloration is heating of the stainless steel at a high degree. Discoloration occurs when
you use the pressure cooker at a high degree. Thus, such discoloration is eliminated
when the pressure cooker is used under normal condition. 't it is not eliminated, it can
be removed with lemon juice. Based on the intensity of discoloration. cleaning process
with vinegar should be repeated. Round, brown and transparent stains often result from
utility and washing water The pressure cooker is stainless as it is made of 18/10
stainless steel. Salt or calcium carbonate sediments (Eime deposit) cause round and
white stains. Do not use dishwasher or specifically decrease the amount of cleaning
materials and use of salt. For instance, when water starts boiling, add only salt or water
into fCH)d to prevent salt stains. You might be living in a region where the water is of
hard nature. Thus, discoloration can be removed also with acidic acid (concentrated
vinegar) or lemon juice. Based on the intensity of discoloration, cleaning process with
vinegar or citric acid should be repeated.
6.5 The pressure cooker Cannot be opened
Even you Sure that the pressure is fully released and the cooker has completely
cooled down, but the pressure cooker cannot still be opened, this is usually because
the valves are not clean. Consult tho authorized service,
34