12
www.electrolux.com
7. OPTIONS
(i
Desired opt' ons must be
activated every' time before
you start a programme.
It IS not possible to activate or
deactivate options while a
programme IS runnng,
Not all options are compatible
with each other, If you have
selected non compatible
options, the appliance will
automatically deactivate one
or more of them. Only the
indicators of the options still
active will stay on.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinSng agents.
This option deactivates the release of salt.
The salt indicator does not come on.
With the use of this option the programme
duration is prolonged to increase the
clean•ng and drying results with the use of
mu ti-tablets.
Multitab is not a permanent option and
must be selected at every
8. BEFORE FIRST USE
1.
2.
3.
4.
5.
Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
Fill the salt container.
Fill the rinse aid dispenser.
Open the water tap.
Start a programme to remove any
processing residuals that can still be
inside the app iance. Do not use
detergent and do not load the
baskets.
How to activate Multitab
Press Option until the 'ndicator comes
on.
7.2 EnergySaver
This option decreases the temperature of
the last rinsing phase and consequently
also the energy consumption
(approximately 25%).
Dishes can still be wet once the
programme is completed.
The duration of the programme wi I be
shorter.
How to activate EnergySaver
Press Option until the indicator
comes on.
If the option is not appl'cable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
The washing phase starts only after this
procedure is completed. The procedure
will be repeated periodically.
8.1 The salt container
/ö CAUTION!
(—0 Only use salt specifically
designed for dishwashers.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in the daily use.
When you start a programme, the
appliance can take up to 5 minutes to
recharge the resln in the water softener. It
seems that the appliance is not working.