Kullanım Kılavuzları
10 47 - 50 84 - go 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57 65 - 75 29 - 36 51 -64 5.1 -6.4 36 - 45 23 - 28 40 - 50 4.0 -50 28 -35 19 22 33 - 39 3.3-39 23 - 27 11-14 19 - 25 1.9-25 13-17 7-18 4-10 0.7-18 5-12 www.electrolux.com Water hardness German de- grees (OdH) French de- grees (0TH) mmol/l Clarke de- grees 37 15 42 18 26 32 6.5 2.6 7.5 3.2 3. 4. 46 18 52 22 Water softener level 10 9 8 7 6 4 3 2 12) S) Factory setting. 2) DO not use salt at this level. If you use multi-tablets conta'ning salt and the hardness of your water is lower than 21 OdH, you can set the lowest water softener leve . It deactivates the salt refill indicator. If you use standard detergent or multi-tablets without salt, set the proper water hardness level to keep the salt refill indicator active. How to set the water softener level The appl'ance must be in programme selection mode. Press Program again and again to change the setting. Press the on/off button to confirm the setting. 6.3 The rinse aid dispenser The r'nse aid helps to dry the dishes without streaks and stains. The r'nse aid is automatically released during the hot rinse phase. Use of rinse aid and multi-tablets When you activate the option Multitab, the rinse aid dispenser continues to release rinse aid. However you can deactivate the rinse aid dispenser. In this case the drying results may not be satisfactory. With the rinse aid dispenser deactivated, the rinse ad indicator is always off. 2. o enter the user mode, press and hold simultaneously Delay and Start ECO AUTO until the indicators and start to flash and the display is blank. press Program. • • • AUTO and The indicators go off. ECO continues to The indicator flash. The display shows the current setting: e.g. 5 L = level 5.