Installation
Install the appliance in a dry, well ventilat-
ed room. The installation locetion should
neither be exposed to direct sunlight
nor near a heat source, e.g. a cooker,
radiator. etc. It installation next to a heat
source is unavoidable, use a suitable
insulating plete or observe the following
minimum distances to a heat source:
3 cm to an eecttic cooker.
30 cm ta an oil or solid-fuel cooker.
Appliances with fitted handles must be
situated at least 55 mm from the wall on
the hinge side so that the door can be
opened by 900
If the refrigerator is tc be oushedi the
height-adjus:able feet at "he front of the
appliance must be completely screwed
in sc that the front wheels can rol. Fig.
Aligning the appliance
Fig. a
Place the appliance in the designatec
location and align.
Adjust the height-adjustable feet with
a wrench,
en
Changing over the door
hinges
We recommend that you have the dODr
hinges changed over by our customer
sennce.
Before you start the conversion work,
pull out the mains plug or remove the
fuse.
Attention! Carefully place the
appliance on its back.
Installation ir numerical sequence.
Fig.
17