Kullanım Kılavuzları
Installation Install the appliance in a dry, well ventilat- ed room. The installation locetion should neither be exposed to direct sunlight nor near a heat source, e.g. a cooker, radiator. etc. It installation next to a heat source is unavoidable, use a suitable insulating plete or observe the following minimum distances to a heat source: 3 cm to an eecttic cooker. 30 cm ta an oil or solid-fuel cooker. Appliances with fitted handles must be situated at least 55 mm from the wall on the hinge side so that the door can be opened by 900 If the refrigerator is tc be oushedi the height-adjus:able feet at "he front of the appliance must be completely screwed in sc that the front wheels can rol. Fig. Aligning the appliance Fig. a Place the appliance in the designatec location and align. Adjust the height-adjustable feet with a wrench, en Changing over the door hinges We recommend that you have the dODr hinges changed over by our customer sennce. Before you start the conversion work, pull out the mains plug or remove the fuse. Attention! Carefully place the appliance on its back. Installation ir numerical sequence. Fig. 17