Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate tae fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Temperature differs greatly
from the set value.
The light does not function.
Fig. WIO
The temperature in the
refrigeratw compartment
is too cold.
Displays do not illuminate.
The temperature in the
freezer compartment is
too warm.
32
Possible cause
Light switch is sticking.
The light (LED) is defective.
Colder temperatures in the
freezer compartment may also
result in colder temperatures in
the refrigerator compartment.
Ths is a consequence of
refrigeration
Power failure; the fuse has been
sl,qtched off; the mains plug has
no- been inserted projerly
• Freezer compartment dcor is
open
• The ventilation openings are
blocked.
• Too much fooc was placed in
the freezer compartmen: at
once.
Remedial action
Il some cases it is adequate to
switch off the appliance for
5 mirutes,
If the temperature is too high, wait
a lew hours and check whether the
temperature has approached the
set value
If the temperature is too low, check
the temperature again the next day.
Check whether the ight switch can
move. Fig. W9
See chaper 'Light'
Slightly Increase the temperature in
the refrigerator compartment
If this is not ad3quate, eg. because
ambient temperatures are too cold,
also increase the temperature in toe
freezer compartment.
Check whether the power is on,
the fuse must be switched or
Close the door.
Ensure that there is adequate
•centilation
Do not exceed max. freezing
capacity