Safety and warning
information
Before you switch ON the
appliance
Please read the operating and Installation
instructions carefully.
They contain important information
on how to install, use and ma ntain the
appliance.
Keep all documentation for subsequent
use or for the next owner.
Technical safety
This appliance contains a small quantity
of environmentally-friendly but flam-
mable R600a refrigeram. Ensure that
the tubing af the refrigerant circuit is not
damaged during transportation and
installation. Leaking refrigerant may
cause eye injures or ignite.
If damage has occurred
— Keep naked fames and/or ignition
sources away fronn the appliance
Thorcughly ventilate the room for
several minutes.
Switch off the appliance and pull out
the mains plug or switch off the fuse.
— Notify customer service.
The more refrigerant an appliance
contains, the larger the room must be.
Leaking refrigerant can form a fam
mable cas-air mixture ir rooms which
are too small.
The room must be at least 1 mg per 8 g
of refrigerart. The amount of refrigerant
in your appliance is indicated on the
rating plate inside the appliance.
20
• Only customer sentice may change
the power cord and carry out any other
repairs. Improper installations and
repairs may put the user at considerable
ref.
Important information when
using the appliance
Never use electrical appliances inside
the appliance (e. g. heaters, electric ice
makers, etc.). Risk of explosion!
Never use a steam cleaner to defrost
or clean the appliance. The steam may
penetrate elec_rica parts end cause
a shor.-circuit
Risk of electric shock!
• Do not use pointed or sharp-edged
imolements to remove frost or layers
of ice.
Yau could damage the refrigerant
tubing. Leaking refrigerant may ignite
or cause eye Injuries.
Do no: stcre products which contain
flammable propellants (e. g. spray cans)
or explosive substances in the
appliance. Explosion hazard!
• Do no: stand or suppcrt yourself on
the base, drawers or coors, etc
Before defrostng or cleaning the
appliance, swi-.ch off the appliance,
pull out the mains olug or switch off
the fuse.
Pull on the mains plug, not on the power
cord.