Controls
Fig.
2
3
4
5
6
7
8
9
10
Temperature display refrigerator
compartment
The numbers correspond to the
set refrigerator compartment
temperatures in oc.
"super" display
Illuminates, if the super cooling is
in operation.
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in 0 C.
Display super freezing
Illuminates when super freezing is
on.
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function"
Energy saving mode display
It is lit when the appliance is not
in use.
Temperature selection buttons
refrigerator compartment
These buttons set
the temperature in the refrigerator
compartment.
"Super" button refrigerator
compartment
Switches super cooling on and
off.
Temperature selection buttons
freezer compartment
These buttons set
the temperature in the freezer
compartment.
"Super" button (freezer
compartment)
Switches super freezing
on and off.
en
Switching
the appliance on
Fig.
Switch on the appliance with the On/Off
button 0/1 1.
A warning signal sounds.
The temperature display 3 flashes
and the alarm display 5 is lit.
Press the "alarm" button 5. The warning
signal switches off and the temperature
display 3 stops flashing.
Display alarm goes out when
the appliance has reached the set
temperature.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 oc
Freezer compartment.
• -18 oc
Operating tips
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised
31