GENERAL INFORMATION
This canopy hood is designed to be fixed to
any rigid vertical surface, over a gas or electric
hotplate and can be used either in the extracton
mode (ucted to the outside) or in the recircu-
lation mode (internal recycling). all cookers
hood perform better when used in evacuation
mode. During winter time it may be convenient
to use the hood in the recyeling mode to avoid
heat loss from the kitchen. Before starting the
installation, consideration should be given to
the difficulties to be found during installation.
The installation work must be undertaken by a
qualified and competent person in conformity to
the rules concerning the evacuation of contami-
nated air. The manufacturer disclaims all liability
for any damage or injury caused as a result of
not following the instructions for installation con-
tained in the following text.
CIB
SAFETY WARNINGS
1.1 When used in the extraction mode, the
cooker hood ducting must not be connected
to a flue which is used for exhausting fumes
from appliances uplied WIth energy Other
than electric, such as a central heating flue
or water heating flue.
1.2 Before connecting to the mains supply
ensure that the mains voltage corresponds
with the voltage on the rating plate inside
the hood.
1.3 Connect the cooker hood to the mains via
a bipolar switch which has 3 mm clearance
between the contacts.
1.4 For cooker hoods featuring an earth cable,
make sure the electric plant of your house
is correctly earthed.
1.5 Appliance in class Il are provided with a
double insullation; therefore do not connect
then through earthed plugs but through sim-
ple bipolar plugs.
1.6 When installed, the hood must be posi-
tioned at least 65 cm above the hotplate.
1.7 Never do flambe cooking under this cooker
hood.
1.8 Never leave frying pans unattended during
use as overheated fat and Oil may catch
fire.
1.9 Before carrying out any kind Of mainte-
nance or cleaning, disconnect the hood
from the mains supply.