For your safety 14. This appliance has a polarized plug (one prong Step 3 Step 5
Important instructions is wider than the other). To reduce the risk Place the motor housing and control box on top Insert the fan blade onto the motor shaft. Secure
Read and save these important safety Instructions of electric shock, this plug is intended to fit of the inner pole and turn the screw "B" on the the blade to the shaft by turning spinner counter
before using this fan. When using electrical in a polarized outlet only one way. If the plug control box to secure it. clockwise.
appliances, basit safety precautions should always does not fit fully in the outlet, reverse the
be followed including the following: plug. If it stili does not fit, contact a qualified
1. Use this fan only as described in this manual. electrician. Do not attempt to defeat this
Other uses not recommended may cause fire safety feature.
or electric shock.
2. This product is intended for household use Warning: To reduce the risk of fire or electrical
ONLY and not for commercial, industrial or shock, do not use this fan with any solid state
outside use. speed control devic-e.
3. To protect against electrical shock, do not place
fan in window, immerse unit, plug or cord in ASSEMBLY
water, or spray with liquids. Step 1
4. Close supervision is necessary when any Connect the base together with the outer pole
appliance is used by or near children. by screwing the screws "D".
5. Unplug the fan from the outlet when not in
use, when moving fan from one location to Step 2 Step 4 Step 6
another and before cleaning. Feed the inner pole through the screw "C" and Feed the motor shaft through the opening of Hook the front grill with grill nut to the rear grill,
6. Do not operate the fan in the presence of extend the inner pole to the desired the rear grill and secure with the grill nut by than screwing the screw "A" tightly, see attached
explosive and/or flammable tunes. height. Secure the tube by tightening the knob turning it clockwise. photo.
7. Do not place the fan or any parts near an open on 'the yoke.
flame, cooking or another heating appliance.
8. Do not operate the fan with a damaged cord,
plug, after a malfunction or if dropped or
damaged in any manner.
9. Avoid contact with moving fan parts.
10. To disconnect, grip the plug and pull it from
the wall outlet. Never yank the cord.
11. The use of attachments is not recommended
and may cause hazards.
12. Always use only a dry level surface.
13. Do not operate it the fan housing is removed
or damaged.
7
Preparation ON/SPEED Timer (1 through 9 hours)
1. Press the ON/OFF button to turn the fan on 1. Press the timer button to set the timer. Each
Remote Control and off. press adds 1 hour to the timer settings until 9
Magnet 2. Select the speed by pressing the SPEED button. hours.
3. The LED lights on the control panel indicate 2. The LED light on the LED panel indicates the
the selected speed setting: High, Msd or Low. selected setting.
CR2025 Cell Battery 3. To turn off the timer, press the timer button
Mode untill all the timer LED lights are off.
1. Press the mode button to select a desired mode:
Normal, Breeze or Sleep. ION
Releases negative ions to clean and freshen
Rattery Cover Oscillation the air. Press the ION button on the remote control
Press the OSC button (on the remote control) to the ionization function.
turn on or off the oscillation function.
1. Remove battery cover from remote control.
2. Place CR2025 cell battery into battery slot.
3. Place battery cover onto the remote control.
Operating instructions
Ali function keys are activated after pressing the
ON/SPEED button by the remote control panel.
FurFEAD srrıum
9