IMPORTANT SAFEGUARDS • Pure dust vacuum may result in blockade Cleaning the Vacuum Cleaner
• The below listed items shall not be of the bag holes. Replace the bag in such Cleaning the vacuum cleaner on time. Otherwise
vacuumed; otherwise the appliance may occurrence even the bag is not filled. the engine may be damaged and vacuum power
be damaged: • Do not use the appliance without motor may decrease.
A. Wet surfaces, water or any other protection filter to prevent the damage. • Press upper function button to remove
liquid the dust bag
B. Live cigarette, paper or ash OPERATION • Hold the handle of the filter and pull it
C. Sharp objects like needle 1. As Standing (Vertical) Vacuum Cleaner out
D. Any flammable or volatile materials, * Before operating the vacuum cleaner • Empty the dust bag
benzene, dye etc. ensure that the filter is in its place in the • Remove the dusts in the filter
• Always unplug when cleaning, checking, dust bag, all the parts are inserted and
repairing etc. services are being giyen. interacting and power button is OFF ("O"). MAINTENANCE
Never off the appliance by directly Take the handle. Press the separating Main body and handle may be washed with a
unplugging from the electrical outlet. button and install the handle to the main soft cloth and water. Dust bag and floor
• Do not expose the appliance to direct body. Then leave the button and turn attachment may be washed with water.
sunlight or do not place next to a heat the handle till a click sound is heard. Never clean your vacuum cleaner with alcohol
source or similar to avoid deformation of • Plug in or benzene.
plastic components or to prevent fire • Open the button
accident. Filter: Do not wash the filter in the washing
• Do not operate the appliance for extended CAUTION: Attention that the cord is not pinned machine. If very dirty and low suction (vacuum
periods when inlet is blocked to avoid to our foot or to other objects power) you should clean the dust layer, wash
deformation of plastic components or • Floor attachment should be moved with water and thoroughly dry.
damaging the engine. upwards downwards to clean the floor.
• Do not operate the appliance in extremely
dusty environments. CAUTION: Do not press the floor attachment
• Clean the outer surface with a soft cloth firmly and do not move to sides, it may damage
and soft detergent. Hard or abrasive the floor.
detergents will damage the surface. * Turn off the button and unplug after use.
• Do not harshly bend or pull the hose to
avoid the damage.
• Do not try to repair, adjust or replace the
vacuum cleaner parts. When broke down,
contact to an authorized service for
examining, repair or electrical/mechanic
adjustment.
• Ensure that the bag is placed correctly
before first use.
7
Trouble S hooti ng
In some cases you may overcome the problem without
service support if you view the following table
Problem Possible Cause Remedy
Engine Improper pluggin, electricity cut, Plug properly, check the
not works power button is off electricity, check the power
button
Weak Suction Air inlet, dust bag or filter may be Take off the blocking dusts ,
(Vacuum) blocked empty the dust bag and clean
the filter
9