Installation
Product must be installed by a qualified perscyn in
accordance with the regulations in force. The manu-
facturer shall not be held responsible for damages
arising from procedures carried out by unauthorized
ersons which ma also void the warran
reparation of location and electrical installa-
i
•on for the product is under customer's
esponsibility.
OANGER:
The product must be installed in accordance
ith all local electrical regu ations.
DANGER:
Prior to installation, visually check if the
roduct has any defects on it. If so, do not
have it installed.
Damaged products cause risks for your safety.
Before installation
The appliance is intended for installation in commer-
cially available kitchen cabinets. A safety distance
WEN
must be left between the appliance and the kitchen
walls and furniture. See figure (values in mm).
• Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 oc minimum).
Kitchen cabinets must be set level and fixed.
It there is a drawer beneath the oven, a Shelf
must be installed oven and drawer.
• Ca thea liance with at leasttwo ersons.
i
Do not install the appliance next to refrigera-
ors or freezers. The heat emitted by the
ppliance will lead to an increased energy
consumption of cooling appliances.
he door and/or handle must not be used for
lifting or moving the appliance.
f the appliance has wire handles, push the
handles back into the side walls after moving
he appliance.