Troubleshooting
Dishes are not placed orderly in the machine. When placing the glasses
and other glassware into the basket lean them not against other dishes but
the edges or racks of the basket or the glass support tines. Striking of the
glasses to each other or to other dishes due to the impact of water during
washing can cause breaks, or scratches on their surfaces.
smear remains on glasses at resembles milk stain whic can not e
emoved when wiped by hand. A bluish / rainbow appearance occurs
hen the glass is pointed to ligh
Excessive rinse aid is used. Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
Corrosion has occurred on glass due to soft water. Measure the hardness
of the supply water appropriately and check the water hardness setting. If
your supply water is soft ( 5 dH), do not use salt. Choose programmes that
wash in higher temperatures (e.g. 60-650C). You can also use glass protective
detergents that are commercially available.
am orms •n the macmne.
Dishes are washed with hand-wash detergent by hand but not rinsed before
placing them into the machine. Hand-wash detergents do not contain
antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Removing the coarse soil on the dishes under tap water, with a
tissue paper or fork will be sufficient.
Rinse aid has spilled into the machine when adding rinse aid. Take care
that rinse aid is not spilled in the machine when you are filling it. Clean any
spilled rinse ait with the help of a tissue paper/towel.
Lid of the rinse aid reservoir is left open. Make sure that the lid of the
rinse aid reservoir is closed after adding rinse aid.
Itc en utensl s are ro em
Dishes are not placed orderly in the machine. Load the dishes as
described in the user manual.
Baskets are overloaded. Do not overload the baskets in excess of their
capacity.
ater remains the dishwasher at the end of the programmee
Filters are clogged. Check if the filter system is clean. Clean the filter
system regularly as illustrated in section "Cleaning and Care".
Discharge hose is clogged/blocked. Check the discharge hose. If
necessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.
If you cannot eliminate the problem although you follow the instructions
I in this section, consult your dealer or the Authorised Service Agent.
Nevert tore air a nonfunctional roduct ourself.
Dishwasher / User's Manual
51/51 EN